What it approves
Installation of S-TEC system 60 two axis automatic flight guidance system Model ST-010 with optional uatotrim system
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States of America Bepartment of transportation—Jfetoal atoiation administration Supplemental 'Cgpe Certificate tSMtmMW' SA4198SW S-TEC Corporation Rt. 4, Bldg. 946 Wolters Industrial Complex Mineral Wells, TX 76067 ^^l^^^^^a^^Y^^y^^ ^^^«^9^«9><<e^^ 2 stfa&es Civil Air XT7J , €424&t&£&7l&/.
~ — - 3A15 Beech H35, J35, K35, M35, N35, P35 Installation of S-TEC System 60 Two xis Automatic Flight Guidance System Model ST-010 with Optional Autotrim System according to Bulletin No. 110, Revision 1, dated 12-07-81 and Master Drawing List No. 9214, Revision A, dated 12-07-81 with Optional Flight Director Steering Horizon, or later FAA approved revision. (14 Volt System) See Continuation Sheet 2 of this STC.
jt^^ S$drnvrU&fca£>v-^J&e' .• September 5, 1980 a^^^u^: December 17, 1981 Revision 1 September 12 1980 ' Don P. Watson/ Manager, Aircraft Certification DivisionSouthwest Region (Title)
FAA FOKM 81 10-2 (10-68)
United States of America Bepartment of ¥ransportation— federal 2toiation administration upplemtntal ICgpt Certificate(Continuation 3hcct) SA4198SW Revision 1 Limitations and Conditions :
1. Pilot's Operating Handbook and FAA Approved Flight Manual Supplement, P/N 8911, dated 9/12/80, is required for Beech Models H35, J35, K35, M35, N35, P35 with S-TEC System 60 Two Axis Automatic Flight Guidance System, Model ST-010; OR Pilot's Operating Handbook and FAA Approved Airplane Flight Manual Supplement, P/N 8911-1, dated 12/17/81, is required for Beech Models H35, J35, K35, M35, N35, P35 with S-TEC System Two Axis Automatic Flight Guidance System with Optional Autotrim System (using Roll Servo P/N 0105-R9).
2. Compatibility of this modification with other previously approved modifications must be determined by the installer.
FAA FORM aiio-2-1 (10-69) PAGE 2 OF 2 PAGES
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.