What it approves
Installation of S-TEC two axis automatic flight guidance system Model ST-030 with optional autotrim system
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
mnited States of arnica Bepartment of transportation —federal 2toiation administration Supplemental t^pe Certificate «v7 SA4264SW Project A5727SW-DS FKP-190 S-TEC Corporation Rt. 4, Bldg. 946 Wolters Industrial Complex Mineral Wells, Texas 76067 vJw^fi^;cle&ictMf^.£fofe>6tc>ufi<n^f>wdu^M^^ Civil Air <Slea&ica£0'nA'.
&i*taina4> \Mveuicf —— ^t 2 A3 Mooney M20C, M20E Installation of S-TEC Two Axis Automatic Flight Guidance System, Model ST-030, with Optional Autotrim System according to Bulletin No. 133, Revision 4, dated 1-28-82 and Master Drawing List No. 9222, Revision D, dated 1-28-82 with Optional Flight Director Steering Horizon, or later FAA approved revision. (14 Volt System) Pilot's Operating Handbook and FAA Approved Airplane Flight Manual Supplement P/N 8919 dated 1/27/81 is required for Mooney Models M20C, and M20E with S-TEC System Two Axis Automatic Flight Guidance System, Model ST-030 with Optional Flight Director Steering Horizon.
Compatibility of this modification with other previously approved modifications must be determined by the installer.
December 24, 1980 January 27, 1981 *„,</ 2/10/82; 5/6/82 Revision 2 (Signature) Don P. WatsonActing Chief, Aircraft Certification Division (Title)
FAA FOKM 8110-2 (10-68)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.