What it approves
Installation of flap and aileron bay gap seals.
What the certificate saysOCR
This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number 5A4330N1 This certificate issued to: Timothy I. Talen Purt 42 f the CIVIL AII Regulations:
Original Product - Type artificate lumber: A-768 Make: Cessna Mulet: 120 and 140 Tripling/Type Luigreated copies of Timothy I. Talen Drawings No. AC-1, sheets 1, 2 Installation of flap and aileron bay gap seals in accordance with FAA and 3; AG-2; AG-3; FG-1, sheets 1 and 2; and FG-2, each dated July 7, 1988, or later FAA approved revisions.
Approval of this change in type design applies to only those Limillions andbondilins: model 120 and 140 airplanes which are re-covered with Stits fabric in accordance with STC No. SA1008WE and Stits Procedures Manual No. 1, dated April 1988, or later FAA approved revision. This approval should not be extended to aircraft of these models on which other previously approved modifications are incorporated unless it is determined that the relationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this Certificate must be maintained as part of the permanent records for the modified aircraft.
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.