What it approves
Installation of S-TEC system 60 two axis flight guidance system Model ST-034 with optional autotrim system
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States of america ^Department of i:ransportation— Jpedcral Stoiation administration 3uppltmcntal l^pt Certificate SA4403SW Pr°Ject A5298SW-DS FKP-213 S-TEC Corporation Rt. 3, Bldg. 946 Wolters Industrial Complex Mineral Wells, Texas 76067 wJfa^yfi&d&ii^ /'»<*^<sw!^^ 3 ^J&v Civil Air
•Jl&SU6tti& 3A21 Cessna 210K, T210K Installation of S-TEC System 60 Two Axis Flight Guidance System, Model ST-"034 with Optional Autotrim System according to Bulletin No. 137, dated 2/20/81 and Master Drawing List No. 9236, dated 2/20/81 and Optional Flight Director/Steering Horizon according to Bulletin No. 120, Revision 1, dated 1/7/81 and Master Drawing List No. 9209, Revision A, dated 1/7/81, or later FAA approved revision. (14 Volt System)
1. Supplemental Flight Manual FAA Approved P/N 8941 dated June 30, 1981, is required.
2. Compatibility of this modification with other previously approved modifications must be determined by the installer.
c^y£<^*^<<^i<c<£<^^?z<z£<i{«^<i<j/yi<?w^ ~*Wst«i<^nj/n-a&<>n/,cia^s^Jt>£n^mviJte^f<lda&&A^^ <QzdmtntAdra& May 8, 1981 June 30, 1981 '/ Mldrj&eTtftiftvi&r' , (Signature^ ^-^MJon P. Watson /) Chief, Engineering and Manufacturing Branch
FAA FOUM 8110-2 (10-68)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.