STC SA4503NM

This Certificate issued to Ceconite Division of Poly-Fiber, Inc. (mailing address) 4343 Fort Drive or P.O. Box 3129 Riverside, California 92509-3129 Riverside, California 92519

Part * of the * Regulations Original Product Type Certificate Number :

* * See attached FAA Approved Model List (AML) No. SA4503NM for list of * approved aircraft mode ls and applicable airworthiness regulations * Description of Type Design Change Remove original cloth covering and install Ceconite covering material in accordance with either Procedure Manual 101 for the Ceconite Aircraft Covering Process, dated August 1997, or Star Gloss Procedure Manual STC SA4503NM Instructions for Continued Airworthiness, dated May 2010, or later FAA approved revisions.

Limitations and Conditions: The approval for this modification applies to the aircraft models on the attached FAA Approved Model List No. SA4503NM only. This installation should not be incorporated in any aircraft unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft. This modification was determined not to increase the noise level and was not considered an “acoustic change” as defined in section 21.93(b), Amendment 21-71 of the Federal Aviation Regulations.

Date of application : June 6, 1988

Date of issuance : January 3, 2000

Date reissued : November 13, 1997;

May 27, 2003; February 25. 2011

Date amended : June 29, 2010

( Signature) Manager, Airframe Branch Los Angeles Aircraft Certification Office ( Title)

Transfer the ownership of the Supplemental Type Certificate Number to (Name of transferee) (Address of transfer) (Number and street)

(City, State, and Zip code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street)

(City, State, and Zip code) Extent of Authority (if licensing agreement):

Signature of grantor (In ink):