What it approves
Installation of S-TEC system 60 two axis automatic flight system Model ST-041 with optional autotrim system
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States of amtrica Bepartment of transportation— federal Stoiation administration Supplemental 'Cgpe Certificate SA4514SW S-1EC Corporation Rt. 4, Bldg. 946 Wolters Industrial Complex Mineral Wells, Texas 76067-9990 ,<$i^ 3 ^J&& Civil Air iSl&&u£a&c>-nA'.
Beech A45 (T-34A) and D45 (T-34B) and thesemodels when modified by STC SA1450SWH.P. Engine) Installation of S-TEC System 60 Two Axis Automatic Flight System, Model ST-041 with Optional Autotrim System according to Bulletin No. 144, dated 10-01-81 and Master Drawing List No. 9274, dated 10-01-81 with Optional Flight Director Steering Horizon according to Bulletin No. 120, Revision 3, dated 5-21-81 and Master Drawing List No. 9209, Revision C, dated 5-21-81, or later FAA approved revision. (28 Volt System) FAA Approved Airplane Flight Manual Supplement dated 10-21-81, P/N 8985, Is required for Beech Models A45 (T-34A) and D45 (T-34B) and the above models when modified by STC SA1450SW (285 H.P. Engine) with S-TEC System 60 Two Axis Automatic Flight Guidance System, Model ST-041 Compatibility of this modification with other previously approved modifications must be determined by the installer.
vrv -us October 8, 1981 October 21, 1981 (Signa/ure j~ P. WatsonActing Chief, Aircraft CertificationDivision ,, (Title)
FAA FOUM 8II0-2 (10-68)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.