STC SA4579SW

Supplemental type certificate · S-TEC Corporation

Holder
S-TEC Corporation · United States
Status
Current · Issued
Status date
January 7, 1982
Applied
December 21, 1981
Product
Aircraft · Single-Engine
Certification basis
Part 21
Data sheet
TCDSA16CE

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of S-TEC System 60 two axis automatic flight guidance system model ST-067 with optional autotrim system with optional flight director steering horizon.

What the certificate says

From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.

United States of aratnca Bepartmcnt of transportation federal 2Unation Administration Supplemental t^pe Certificate ^/uvrrww' SA4579SW S-TEC Corporation Rt. 4, Bldg. 946 Wolters Industrial Complex Mineral Wells, IX 76067 23 -^^^^Federal Aviation tSt£&4i<C&>c A16CE Cessna 207A, T207A installation of S-TEC System 60 Two Axis Automatic Flight Guidance System, Model ST-067 with Optional Autotrim System according to Bulletin No. 170, dated 12-18-81 and Master Drawing List No. 9280, dated 12-18-81 with Optional Flight Director Steering Horizon; or later FAA approved revision.

(28 Volt System) see Continuation Sheet, page 2, of this STC.

jie&iniiiijt^ Sa(e&nvn*&foa/€>v4&Mn,e' December 21, 1981 January 7, 1982 '(Signature) Don F. WatsonManager, Aircraft Certification Divisiong/->ll«-Vl«J««Q«-

FAA Pom 8110-2 (10-68)

tinted Starts of amcrira Btpartment of transportation— ^federal H&iation administration upplemental ICgpe Certificate(Continuation £heet) SA4579SW Limitations and Conditions:

1. Pilot'8 Operating Handbook and FAA Approved Airplane Flight VnMl Supplement P/N 8989 dated 1-7-82 is required for Cessna Models 207A and T207A S/N 20700483 and UP with S-TEC System 60 Two Axis Automatic Plight Guidance System; OR, FAA Approved Supplemental Flight Manual P/N 8991, dated 1-7-82 is required for Cessna Models 207A and T207A, S/N 20700363 through S/N 20700482 with S-TEC System 60 Two Axis Automatic Flight Guidance System.

2. Compatibility of this modification with other previously approved modifications must be determined by the installer.

FAA FORM 8110-2-1 (1O-69) PAGE 2OF 2 PAGES

TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number to (Name of transferee) (Address of transferee) (Number and street) (City, State, and £IP code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street) (City, Stale, and £IP code) Extent of Authority (if licensing agreement):

Signature of grantor (In ink):

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 2

MakeModelData sheet
Cessna Aircraft Company207AA16CE
Cessna Aircraft CompanyT207AA16CE