What it approves
Installation of S-TEC system 60 single axis automatic flight guidance system, Model ST-013.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United $tatt* or Bmrrica ©epartment of transportation—federal Htoiadon administradon Supplemental t^pe Certificate SA4587SW Project A5607SW-DSFKP-130 S-TEC Corporation Rt. 4, Bldg. 946 Wolters Industrial Complex Mineral Wells, TX 76067 ^<^^/i^xj4l«j?*zy^.<$ie^fe(^*W^^ Civil Air Beech A45 (T-34A) and D45 (T-34B) and these models when modified by STC SA1450SW(285 H.P.Engine) nja*< .' Installation of S-TEC System 60 Single Axis Automatic Flight Guidance System, Model ST-013, according to Bulletin No. 113, dated 10-01-81 and Master Drawing List No. 9276, dated 10-01-81, or later FAA approved revision.
(28 Volt System) — FAA Approved Airplane Flight Manual Supplement, P/N 8986 dated 1-22-82, is required for Beech Models A45 (T-34A) and D45 (T-34B) and the Above Models When Modified by STC SA1450SWlInstalla tion of 285 Iff ,EngincOLwlth S-TEC System60 Single Axis Automatic Flight Guidance System, Model ST-013 Compatibility of this modification with other previously approved modifications must be determined by the Installer.
^ -u< October 28, 1981 January 22, 1982 -J *i _ / a __ P. WatsonActing Chief, Aircraft Certification Division ^^ (Title)
This certificate may be transferred in accordance with FAR 21 AT.
FAA FouM 81 10-2 (10-68)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.