What it approves
Installation of S-TEC System 60 two axis automatic flight guidance system, Model ST-078 with optional autotrim system and flight director steering horizon
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United grata of amrrica Bcpartment of Itraasportation-federal aoiarion administration Supplemental 'Cgpe Certificate <sleaM6a&{mA<.
Gi^tat-fva/ <M*>eutc£ —— SA4610SW Project A5661SW-DS FKP-190 S-TEC Corporation Rt. 4, Bldg. 946 Wolters Industrial Complex Mineral Wells, Texas 76067 J/in&JiuSi&deAjjiavn/f^^MJcrt'Uw and 23 21 ."L^lc^dU Federal Aviation :ti^ 1EU : Partenavia P68B, P68C Installation of S-TEC System 60 Two Axis Automatic Flight Guidance System, Model ST-078 with Optional Autotrim System according to Bulletin No. 181, dated 1-28-82 and Master Drawing List No. 9290, dated 1-28-82 with Optional Flight Director/Steering Horizon; or later FAA approved data revision. (28 Volt System)
1. FAA Approved Supplement to Pilot's Operating Handbook and/or FAA Approved Airplane Flight Manual, P/N 89105, dated 2-22-82, is required for Partenavia Models P68B and P68C with S-TEC System 60 Two Axis Automatic Flight Guidance System,
2. Compatibility of this modification with other previously approved modifications must be determined by the installer.
Sxc^rfH/rnA^a^or-^^f<7 ' February 1, 1982 February 22, 1982 : /~ (Signature)Don P. Watson /Acting Chief, Aircraft CertificationDivision - Southwest Region (Title)
FAA Font ai 10-2 (10-68)
TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number to (Name of transferee) (Address of transferee) (Number and street) (City, State, and <7/> code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street) (City, State, and ^IP code) Extent of Authority (if licensing agreement):
Signature of grantor (In ink):
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.