What it approves
Installation of S-TEC System 60 single axis automatic flight guidance system, Model ST-066
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
mnittd States or America Bepartment of transportation—federal aviation administration Supplemental ICgpe Certificate SA4631SW S-TEC Corporation Rt. 4, Bldg. 946 Wolters Industrial Complex Mineral Wells, Texas 76067 ^^^^^^^^^^^^^^ 'y^z««^^Si<^^^w««>»^{<w*i^x«^«>«^i«^z^^/Jx«y</ 23 ^>Jj£e' Federal Aviation A16CE Cessna 207A, T207A Installation of S-TEC System 60 Single Axis Automatic Flight Guidance System, Model ST-066 according to Bulletin No. 169, Rev. 1, dated 4-01-82 and Master Drawing List No. 9288, Revision A, dated 4-01-82; or later FAA approved revision. (28 Volt System) See Continuation Sheet, page 2 of this STC.
S^.c^n^ntii^a^f^'^^i^e- January 11, 1982 <2Lte>*cmu*J: August 3, 1982 ^ Revision 1 22, 1982 P. Watson7 (Slgnatme) // Manager, Aircraft Certification DivisionSouthwest Region (Title)
FAA FOIM 8110-2 (10-68)
ttiritrd £tatt> of 2Untrira ©epartmcnt of transportation— federal aviation administration Supplemental TCgpe Certificate(Continuation &heet) SA4631SW Revision 1 Limitations and Conditions :
1. FAA Approved Supplement to Pilot's Operating Handbook and/or FAA Approved Airplane Flight Manual, P/N 8998, dated 3-22-82 is required for Cessna Models 207A and T207A with S-TEC System 60 Single Axis Automatic Guidance System; OR, FAA Approved Supplement to Pilot's Operating Handbook and/or FAA Approved Airplane Flight Manual, P/N 8998-1 dated 8-3-82, is required for Cessna Models 207A and T207A, S/N 20700483 and UP with S-TEC System 60 Single Axis Automatic Flight Guidance System; OR, FAA Approved Supplemental Flight Manual P/N 8999 dated 8-3-82 is required for Cessna Models 207A and T207A, S/N 20700363 through S/N 20700482 with S-TEC System 60 Single Axis Automatic Flight Guidance System.
2. Compatibility of this modification with other previously approved modifications must be determined by the installer.
FAA FORM siio-2-1 (1O-69) PAGE 2OF 2PAGES
TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number __ to (Name of transferee) (Address of transferee) I Number and street) (City, Slate, and <7/> code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street) (City, State, and <7/> code) Extent of Authority (if licensing agreement):
Signature of grantor (In ink): _
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.