What it approves
Installation of EAC-12D40- AG-100-4S propellers on P&W R-1340-AN-1-SH1H-1.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SA465NW This certificate, issued to: Pacific Propeller International LLC 5802 South 228th Street Kent, WA 98032-1810 Part 3 of the Civil Air Regulations, effective May 15, 1956, with amendments 3-1 through 3-8.
Original Product ⎯Type Certificate Number: A3SW Make: Rockwell Commander Model: 600 S-2D and S-2R
Description of the Type Design Change: Installation of Pacific Propeller, Inc. EAC-12D40-425/AG- 100-4S and 22D40-503/AG-200-4S propellers, governors, and associated systems on Pratt & Whitney R-1340 engine series in accordance with FAA sealed Pacific Propeller Installation Instructions No. E.A.C. No. 1011 (EAC-12D40-425/AG-100-4S) and No. 1013 (EAC–22D40-503/AG-200-4S).
Limitations and Conditions: Approval of this change in type design applies basically to the above model aircraft only. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft. A copy of this Certificate and Addendum No.
SA465NW, shall be maintained as part of the permanent records for the modified aircraft.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission. (See Continuation Sheet, Page 3.)
Date of application: November 19, 1977 Date reissued: March 25, 2004 Date of issuance: June 13, 1977 Date amended: 2/7/80; 3/25/04; 6/30/05
(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)
FAA FORM 8110-2(10-68
Pacific Propeller International LLC 5802 South 228th Street Kent, WA 98032-1810
Number SA465NW
SUPPLEMENTAL TYPE CERTIFICATE ADDENDUM NO. SA465NW
Reissued: 3/25/04 Amended: 6/30/05
Limitations and Conditions(Cont’d): The Conditions and Limitations of Type Certificate Data Sheet No. A3SW apply except where superseded by the following:
This Supplemental Type Certificate Data Sheet, which is part of STC SA465NW, prescribes the conditions and limitations under which the product for which the STC was issued meets the airworthiness requirements of the Federal Aviation Administration.
MODELS 600 S-2D AND S-2R (NORMAL CATEGORY ONLY) AS MODIFIED BY STC SA465NW
Engine: Pratt & Whitney R-1340-AN-1, S1H1 and S3H1
Engine Limits: Same as specified in the Type Certificate Data Sheet
Propeller and Propeller Limits: 1. Hamilton Standard 12D40-425/AG-100-4S Diameter: 104” maximum (2% cut off permitted) RPM: 2250 @ 36” Hg (sea level) maximum H.P. 600 hp Pitch Setting: 11° Low; 20° High at 42” radius Governor:
HS 4M12 HS 1M12
2. Hamilton Standard 22D40-503/AG-200-4S Diameter: 104” (2% cut off permitted) RPM: 2250 @ 36” Hg (sea level) maximum H.P. 600 hp Pitch Setting: 10.5° Low; 35° High at 42” radius Governor:
4G10-21
- END -
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 2
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| June 30, 2005 | Amended, current | Certificate |
| March 25, 2004 | Reissued, earlier issue | CertificateSA465NW.CON |