What it approves
Installation of S-Tec system 60 single axis automatic flight guidance system Model ST-004.
What the certificate saysOCR
This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.
Ent Sates • 20 a Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA513254-0 This certificate issued to: S-TEC Corporation Rt. 4, Bldg. 946 Wolters Industrial Complex Mineral Wells, Texas 76067 corlifees that the changs in the lyrs desige for the following product with the limilations and conditions shovefor as specifiod hereon meels the airventhiness reguirements of Port 3 of the CiVil Air Rogulations.
Original Product -TypeContificato Numbon: 2A3 Make: Mooney Model: M2OC, M2OD and M2OE Description of Type Design Change:
Installation of S-TEC System 60 Single Axis Automatic Flight Guidance System, Model ST-004, according to Bulletin No. 104, Revision 5, dated 7-07-89 and Master Drawing List No. 9205, Revision E, dated 7-07-89 and/or later FAA Approved revisions of the above data (14 Volt System).
1. Only eligible on Mooney Model M20D When Modified Per Mooney Drawing No. 950082 (Retractable Gear Conversion).
(See Continuation Sheet, page 2, a part of this STC.)
Holdeman DAS Staff Coordinator, DAS 5 SW (Title)
97.
PAA FORM 8110-2 (10-68)
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number SA5132SW-D, Revision 1 Limitations and Conditions: (con't.)
2. FAA Approved Supplemental Flight Manual, P/N 89131-1, dated 1-25-83 is required for Mooney Models M20C and M20E and/or later FAA Approved revisions of the above supplement.
3. FAA Approved Supplement to Pilot's Operating Handbook and/or FAA Approved Airplane Flight Manual, P/N 89131-2, dated 8-21-89 is required for Mooney Model M20C; M20D When Modified Per Mooney Drawing No. 950082 (Retractable Gear Conversion) and M20E and/or later FAA Approved revisions of the above supplement.
4. Compatability of this modification with other previously approved modifications must be determined by the installer.
47 PAGE 2 OF 2 PAGES
TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number to (Name of transferee) _ (Address of transferee) (Number and street) (City, State, and ZIP code) from (Name of grantor) (Print or type).
(Address of grantor) (Number and street) (City, State, and ZIP code ) Extent of Authority (if licensing agreement):
Signature of grantor (In ink):
U.S. GOVERNMENT PRINTING OFFICE: 1966 OF OF-205-579
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.