What it approves
Installation of Mitchell Automatic Trim Model AK160
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FEDERAL AVIATION AGENCY
1. NAME AND ADDRESS OF APPLICANT Mitchell Industries, Inc.
P O Box 610 Municipal Airport Mineral Wells, Texas 76067 Form Approved, Budget Bureau No. 04-R015 INSTRUCTIONS - Submit in triplicate to local FAA Flight Standards Inspector. Copy will be returned to applicant upon issuance.
2. SUPPLEMENTAL TYPE CERTIFICATE APPLIED FOR:
•JH | AIRCRAFT 1 1 ENGINE 1 1 PROPELLER
ORIGINAL MODEL DESIGNATION Beech 95. B95, B95A fc D95A NEW MODEL DESIGNATION (If desired) None 3, DESCRIPTION OF CHANGE Installation of Mitchell Automatic Trim Model AK160 per Mitchell Industries, Inc. Bulletin No. 278 dated May 6, 1965 and subsequent FAA approved bulletins and/ or supplements.
*A. WILL DATA BE AVAILABLE FOR SALE OR RELEASE TO
b. WILL PARTS BE MANUFACTURED FOR SALE (Rot. CAR
5. SIGNATURE AND TITLE OF APPLICANT May 6, 1965
DATE OF APPLICATION OTHER PERSONS? B YES 1 1 NO 1 .55.)? A~l YES 1 1 NO / ''1 -^ ^ /•''' / ' " ' /"x s'; "«/- , . ^ // -^ / 2^T, '_/ - X / / SIGNATURE'' / Project Engineer TITLE
6. To be completed by FAA
NATURE AND LOCATION OF DATA Data listed in item 3 above, and Speed Meno dated May 13, 1965 of Flight Teat on file at SW-210.
Reference Project: Hone Applicable regulations: Sane as original certification.
ORIGINAL TYPE CERTIFICATE NO. FAA APP 3A16 'PLEMENTAL TYPE CERTIFICATE NO.
SA516SW DATE 6F APPROVAL , s/iV** x^-Ch ROVAL 4«^ SI GNATURE H. H. Slaughter ief , Engineering and Manufacturing Branch Tl TLE 3540 Form FAA-2417 (5-59)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.