STC SA5195NM

Number SA5195NM

This certificate, issued to: AIM Aerospace, Inc 705 SW 7th St Renton, WA 98057

Part 25 of the Federal Aviation Regulations. (See Type Certificate Data Sheet A22WE for complete certification basis.)

Original ProductType Certificate Number: A22WE Make: McDonnell Douglas Model: DC-10-40

Description of the Type Design Change: Installation of a Zone A closet in accordance with AIM Aviation Drawing List DL1002, Revision F, dated November 18, 1991, or later FAA-approved revisions. The installation also complies with FAR 121.312(a)(1).

Limitations and Conditions: The approval of this change in type design applies basically to the above model aircraft only. This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any other previously approved modifications will introduce no adverse effect upon the airworthiness of that aircraft. The resulting interior arrangement, along with the required placarding, have not been evaluated and are not part of this supplemental type certificate. A copy of this certificate and AIM Aviation Drawing List DL1002 must be maintained as part of the permanent records for the modified aircraft.

If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of application: May 15, 1991 Date reissued: July 5, 2011 Date of issuance: January 30, 1992 Date amended:

(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)