What it approves
Installation of S-TEC System 40/50 single and two axis automatic flight guidance systems ST-213/40/50.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Hnicrt Stara of aatrica Bepartment of transportation—.federal atriation administration Supplemental t^pe Certificate SA5230SW-D S-TEC Corporation Rt. 4, Bldg. 946 Welters Industrial Complex Mineral Wells, TX 76067 ~ j&Jirie/ ^'" ' ' nil £*r~ta* CESSNA 210K AND T210K Installation of S-TEC System 40/50 Single and Two Axis Automatic Flight Guidance Systems, Model ST-213-40/50, according to Bulletin No. 313, dated 8-23-83 and Master Drawing List No. 92235, dated 8-23-83 and/or later FAA Approved revisions of the above data, (14 Volt System).
1. FAA Approved Supplemental Flight Manual, P/N 89219, dated 10-28-83 is required for S-TEC System 40 and/or later FAA Approved revisions of the above supplement.
(See Continuation Sheet, Page 2, a part of this STC) .
.&*^ni^^ SiXt*rn*njA&a£>r'j]fJ 9-26-83 10-28-83 (Signaturt) Harold W, Holdeman DAS Staff Coordinator, DAS 5 SW (Title) 47, FAA POM IUO-2(IO-«<)
Unitrd £tatu of amtrira ©epartmtnt of Transportation— Jftderal aoiation administration upplemental t:gpe Certificate(Continuation £heet) SA5230SW-D Limitations and Conditions (con't)
2. FAA Approved Supplemental Flight Manual, P/N 89221, dated 10-28-83 is required for S-TEC System 50 and/or later FAA Approved revisions of the above supplement.
3. Compatability of this modification with other previously approved modifi cations must be determined by the installer.
. 1'.". .ii'.'-rntiim nf this tertificate is punishable by a fine nj not exceeding SI.000, or imfintnnmcnt not exceeding J years, «i both (AA F -..OM 8110-2-1 (10-69) 'J his certificate may be lr an <J erred in .icc-rdnnce :tit!i I-'.IR Jl l~ 2fPAGE ^OF '-PAGES
TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number .
to (Name of transferee) (Address of transferee) (Number and street) (City, State, and <7/> code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street) (City, State, and %]P code) Extent of Authority (if licensing agreement):
Signature of grantor (In ink):
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.