What it approves
Installation of the Skyote Gap Flap System.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This certificate issued to: Otto E. Bartoe Jr.
57980 CR 62 Clark, CO 80428
Part 3 of the Civil Air Regulations.
Original Product - Type Certificate Number : 3A24 Make : Cessna Model : 185, 185A, 185B, 185C, 185E, A185E, A185F
Installation of the Skyote Gap Flap System in accordance with Skyote Aeromarine Top Drawing No. 9100, Rev. D, dated August 31, 1992, and Installation Instructions Report No. 001, Rev. N/C, dated August 31, 1992, or later FAA approved revisions.
1. FAA Approved Skyote Aeromarine Airplane Flight Manual Supplement No. FMS-01, dated September 1, 1992, or later FAA Approved revision is a required part of this STC.
2. This approval should not be exte nded to aircraft of this model on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications, including changes in type design, will introduce no adverse effect upon the airworthiness of that aircraft.
Date of application : August 12, 1991 Date of issuance : September 1, 1992 Date reissued : October 26, 2011
Date amended : April 4, 1994
( Signature) Todd Dixon Manager, Denver Aircraft Certification Office (Title)
FAA FORM 8110-2-1(10-69) PAGE 2 of 2 PAGES
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 7
Every issue · 2
DRS keeps each issue of an STC as its own record, with its own certificate and attachments.
| Date | Status | Files |
|---|---|---|
| October 26, 2011 | Reissued, current | Certificate |
| April 4, 1994 | Amended, earlier issue | Certificate |