What it approves
Installation of S-TEC System 40/50 single and two axis automatic flight guidance systems Model ST-194-40/50.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Uratri £tatts of 3nmca
•Department of transportation — jftdtral SUriation administration Supplemental l^pe Certificate SA5281SW-D S-TEC Corporation Rt. 4, Bldg. 946 Wolters Industrial Complex Mineral Wells, TX 76067 a^i ^ea<u^em4n&, ^f \Jarf 3 jitsffie L1V1 I Air f^r^atna/ Jwciuf/ —— •Lf' CESSNA 210G, T210G, 210H, T210H, 210J AND T210J Installation of S-TEC System 40/50 Single and Two Axis Automatic Flight Guidance Systems, Model ST-194-40/50, according to Bulletin No. 294, Revision 1, dated 6-18-85 and Master Drawing List No. 92254, Revision A, dated 6-18-85 and/or later FAA Approved revisions of the above data (14 Volt System),
1. Also eligible on Models T210G, T210H and T210J when modified per STC SA2689SW (RAM Modification).
(See Continuation Sheet, Page 2, a part of this STC.)
^c**rn**i4i£u>n 12-09-83 Qla£*~*A*u*<t '.- 8-06-85, Revision 1 3-05-84 ^.t^rw^ai,/.- t^JsU'di/recium/M'Jlne' S&vm&ni&faa&rr- (Signature) Harold W. HoldemanDAS Staff Coordinator, DAS 5 SW (Title) ~
This crrttficatt may ht tranifernj in tetoraance with FAR 21.47.
FAA fo«- II IO-5(10-4»)
ttnitrd &tar« of ancrica Bepartment of Transportation— federal SUJiation administration Supplemental t:j)pe Certificate(Continuation £heet) SA5281SW-D, Revision 1 Limitations and Conditions (con't)
2. FAA Approved Supplemental Flight Manual, P/N 89356-1, dated 8-06-85 is required for Cessna Models 210G, T210G, 210H, T210H, 210J, T210J and Models T210G, T210H and T210J when modified per STC SA2689SW (RAM Modification) for S-TEC System 40 and/or later FAA Approved revisions of the above supplement.
3. FAA Approved Supplemental Flight Manual, P/N 89357-1, dated 8-06-85 is required for Cessna Models 210G, T210G, 210H, T210H, 210J, T210J and Models T210G, T210H and T210J when modified per STC SA2689SW (RAM Modification) for S-TEC System 50 and/or later FAA Approved revisions of the above supplement.
4. FAA Approved Supplemental Flight Manual, P/N 89356, dated 3-05-84 is required for Cessna Models 210G, T210G, 210H, T210H, 210J and T210J for S-TEC System 40 and/or later FAA Approved revisions of the above supplement.
5. FAA Approved Supplemental Flight Manual, P/N 89357, dated 3-05-84 is required for Cessna Models 210G, T210G, 210H, T210H, 210J and T210J for S-TEC System 50 and/or later FAA Approved revisions of the above supplement.
6. Compatabil ity of this modification with other previously approved modifications must be determined by the installer.
this certificate is punishable by a fine oj not exceeding SI,000, or imprisonment not exceeding 3 years, or hn/h.
I MO-69) 7his certificate may be transferred in accordance with i.\R 'J/.J?
TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number to (Name of transferee) _ (Address of transferee). (Number and street) (City, State, and £IP code) from (Name of grantor) (Print or type) .
(Address of grantor) (Number and street) (City, State, and ^IP code) Extent of Authority (if licensing agreement):
Signature of grantor (In ink):
U.S. GOVERNMENT PRINTING OFFICE : 1966 OF —205-579
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.