What it approves
Installation of S-TEC System 40/50 single and two axis automatic flight guidance systems, Model ST-224-40/50.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
ttritri £tatn Bcpartment of Transportation—federal dotation administration Supplemental l^pe Certificate SA5301SW-D S-TEC Corporation Rt. 4, Bldg. 946 Wolters Industrial Complex Mineral Wells, TX 76067 y£>»* JA&^e&uxifvnp'fwwetucJMfiJn JA+'£irU£a£0nA.-ji*td4x>ndt£u>nA< 3 -^<0£e- ClVl'l Air f -sif&t&CG&u^ srairva i*e>tiuc —— <ye> ~4*infa*Su*rri0o*- : 3A16 BEECH 58 AND 58A Installation of S-TEC System 40/50 Single and Two Axis Automatic Flight Guidance Systems, Model ST-224-40/50, according to Bulletin No. 324, dated 9-22-83 and Master Drawing List No. 92252, dated 9-22-83 and/or later FAA Approved revisions of the above data, (28 Volt System).
1. FAA Approved Supplement to Pilot's Operating Handbook and/or FAA Approved Airplane Flight Manual, P/N 89350, dated 4-5-84 is required for S-TEC System 40, and/or later FAA Approved revisions of the above supplement.
(See Continuation Sheet, Page 2, a part of this STC).
z^ Je*^rU*i4i£^^ S&c&n*nilfoa£o*-*i£4A+- ff / 12-15-83 4-5-84 (Signattai) Harold W. Holdeman DAS Staff Coordinator. DAS 5 (Title)
This certificate may In traiufemd in accordant* with FAR 21.47.
FAA POM tno-2 (!»-«•)
tinted £tatu of antrica Bepartment of Transportation— Jfedcral aoiation administration upplemental Itgpe Certificate(Continuation £hett) SA5301SW-D Limitations and Conditions (con't)
2. FAA Approved Supplement to Pilot's Operating Handbook and/or FAA Approved Airplane Flight Manual, P/N 89351, dated 4-5-84 is required for S-TEC System 50, and/or later FAA Approved revisions of the above supplement.
3. Compatability of this modification with other previously approved modifications must be determined by the installer.
FAA FORM ei 10-2-1 (10-69) This ctrttfcalt may be transferred in accordance with FAR 21.17.
TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number to (Name of transferee) (Address of transferee) (Number and street) (City, State, and <JP code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street) (City, State, and <7/> code) Extent of Authority (if licensing agreement):
Signature of grantor (In ink):
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.