What it approves
Installation of S-TEC System 60 single axis automatic flight guidance system model ST-008.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
ttritt* goto if Btpartmtnc of transportation— JNcral aoiation administration Supplemental t^pe Certificate SA5311SW-D S-TEC Corporation Rt. 4, Bldg. 946 Wolters Industrial Complex Mineral Wells, TX 76067 0 M'^ne? ClVll Air ,slea<u4a'£u f&iain&t tJvwctt&ef —— • A4hU
REIMS-CESSNA F172M AND F172N nj&e' .
Installation of S-TEC System 60 Single Axis Automatic Flight Guidance System Model ST-008, according to Bulletin No. 108, Revision 1, dated 12-21-83 and Master Drawing List No. 9218, Revision A, dated 12-21-83 and/or later FAA Approved revisions of the above data, (14 Volt System).
FAA Approved Supplemental Flight Manual, P/N 89406, dated 4-26-84 is required and/or later FAA Approved revisions of the above supplement.
Compatability of this modification with other previously approved modifi cations must be determined by the installer.
***i~i*fsJ' 2-10-84 4-26-84 (Stgnolvrt) Harold W. Holdeman DAS Staff Coordinator, DAS 5 SW (TitU)
This certtficatt may bt tiamftrrtd in accardana with FAR 21.47.
FAA Fowi • 110-1 (10-6()
TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number to (Name of transferee) (Address of transferee) (Number and street) (City, State, and ^IP code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street j (City, State, and <7/> code) Extent of Authority (if licensing agreement):
Signature of grantor (In ink):
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.