What it approves
Installation of S-TEC System 60 single axis automatic flight guidance system, Model ST-244.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
ttmtrd $tatu of 3Lnnua Btpartmcnt of Importation -federal Stoiation administration Supplemental HTgpe Certificate SA5342SW-D fatj i a/ &i* -cA-a ria* ^ n S-TEC Corporation Rt. 4, Bldg. 946 Wolters Industrial Complex Mineral Wells, TX 76067
•^S'uJit ~t}* A^lOCE CESSNA 177RG ««^ 23 ^ /A*. Federal Air f*'_siij^Le ^z ^iia n 'ya-na^ .' Installation of S-TEC System 60 Single Axis Automatic Flight Guidance System, Model ST-244, according to Bulletin No. 344, dated 7-10-84 and Master Drawing List No, 92281, dated 7-10-84 and/or later FAA Approved revisions of the above data (28 Volt System).
FAA Approved Supplement to Pilot's Operating Handbook and/or FAA Approved Airplane Flight Manual, P/N 89494, dated 10-2-84 is required and/or later FAA Approved revisions of the above supplement.
Compatabil ity of this modification with other previously approved modifications must be determined by the installer.
SXdm&n* Harold W. Holdeman DAS Staff Coordinator, DAS 5 SW (Title)
TAu certificate may be trarufrrrtd in accordance with FAR 21.47.
1 10-2(10-68)
TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number .
to (Name of transferee) (Address of transferee) (Number and street) (City, State, and £IP code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street) (City, Stale, and ZIP code) Extent of Authority (if licensing agreement):
Signature of grantor (In ink):
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Cessna Aircraft Company | 177RG | A20CE |