What it approves
Installation/relocation of Sell Galleys and provisions for passenger overhead stowage bins. (747-230B)
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 25 of the Federal Aviation Regulations. *See T. C. Data Sheet A20WE for certification basis.
Description of Type Design Change: Installation/relocation of Sell Galleys and provisions for passenger overhead stowage bins in accordance with FAA approved Elsinore Aerospace Systems Drawing List No. 1880-2530-000, Revision F, dated March 23, 1993, or later FAA approved revision.
Limitations and Conditions: The approval of this installation applies to the above noted airplane model series only. This approval should not be extended to other specific airplanes of this model series unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft. Note: The components installed by the STC have not been demonstrated to comply with the Heat Release Requirements (65/65) and the Smoke Emission Requirement (200) of FAR 25.853(a-1), Amendment 25-66.
TASS, Inc.
12016 115th Ave., N.E.
Kirkland, WA 98034 A20WE Make : Boeing Model : 747-230B Series
Date of application : December 14, 1990
Date of issuance : June 22, 1993
Date reissued : May 20, 1994; March 24, 2009
( Signature) Michele M. Owsley Manager, Airplane Certification Office, Southwest Region
( Title)
FAA Form 8110-2-1(10-69) Page 2 of 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Boeing Company | 747-200B Series | A20WE |