What it approves
Install Hoskins/SDI CFS-2000 Fuel Flow System.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
4125 Hangar Dr., N.W.
Bemidji, MN 56601
Part 3 of the Civil Air Regulations.
Original Product--Type Certificate Number : 3A15 Make : Beech Model : 65, 65-80, 65-A80, 65-B80, A65, 70
Description of Type Design Change: Install Hoskins/SDI CF-2000 Fuel Flow System in accordance with Excalibur Aviation Master Drawing List 28-63000, Rev. IR, dated 5/15/1983, or later FAA approved revision.
FAA Approved Airplane Flight Manual Supplement dated November 3, 1983, is required.
This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated, unless it is determined by the installer that the interrelationship between this change and any other previously approved modifications will produce no adverse effect upon the airworthiness of that airplane. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission."
STC SA444SW is required for this STC.
Date of application : December 24, 1980
Date of issuance : November 03, 1983 Date reissued : February 11, 1999, July 9, 1999
( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office
(Title)
FAA FORM 8110-2-1(10-69) PAGE 2 of 2 PAGES
Number
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.