What it approves
Installation of conveyors in lower forward and aft compartments.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SA5855NM
Ancra International LLC 875 W . 8th Street Azusa, California 91702 This Certificate issued to
Part 25* of the Federal Aviation Regulations.
* See Type Certificate Data Sheet A2NM for Certification Basis.
A2NM
Boeing
757-200, -200F Original Product Type Certificate Number :
Description of Type Design Change: Installation of conveyors in lower forward and aft compartments in accordance with FAA approved Ancra Controlled Drawing List DL 81726, Revision “N/C”, dated July 28, 1992, or later FAA approved revision.
Limitations and Conditions: The approval of this installation applies to the above noted airplane model series only. This approval should not be extended to other specific airplanes of this model series unless it is determined that the interrelationship between this change and any of those other previously approved modifications will not introduce any adverse effect upon the airworthiness of the aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : June 1, 1992
Date of issuance : October 14, 1992 Date reissued : October 8, 1996; March 29, 2012
( Signature) Supervisor, Technical & Administrative Support Staff Los Angeles Aircraft Certification Office
(Title)
Number (STC No.)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.