What it approves
Manufacture and installation of cargo transfer system.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This Certificate issued to Goodrich Corporation, Cargo Systems Division 2604 Highway 20 North Jamestown, North Dakota 58401 Part 25 of the Federal Aviation Regulations.
A20WE BOEING 747-100, -200 Description of Type Design Change: Manufacture and installation of cargo transfer system in accordance with Aero Union Corporation Drawing List No. 1222, Revision F, dated October 13, 1992, or later FAA approved revisions, FAA Airplane Flight Manual Supplement # 1280, dated November 23, 1992.
Limitations and Conditions: This approval should not be extended to other aircraft of this model on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will produce no adverse effect upon the airworthiness of that airplane.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : September 26, 1991
Date of issuance : November 23, 1992
Date reissued : August 3, 2004
( Signature) Manager, Technical & Administrative Support Staff, Los Angeles Aircraft Certification Office ( Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.