What it approves
Installation of range-marked EGT, CHT, oil temperature, and pressure gauges.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Part 3 of the Civil Air R egulations.
Original Product Type Certificate N umber :
Installation of range-marked EGT, CHT, oil temperature, and pressure gauges in accordance with RAM Aircraft Corporation Drawing No. 1152 dated 1/16/85, or later FAA approved revision.
FAA Approved Airplane Flight Manual Supplement dated July 14, 1986, is required for Cessna Models 421, 421A, and 421B with Teledyne Continental GTSIO-520-D or –H engines; Supplement dated February 1, 1985, is required for Cessna Model 421C with Teledyne Continental GTSIO-520-N or –L engines.
Compatibility of this design change with previously approved modifications must be determined by the installer. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
RAM Aircraft, Limited Partnership 7505 Karl May Drive Waco, TX 76708 A7CE M ake : Cessna M odel : 421, 421A, 421B, 421C Date of a pplication : October 17, 1984
Date of issuance : February 01, 1985
Date reissued : October 08, 2001
Date amended : July 17, 1986 Revision 1
B y direction of the A dministrator
(Signature) S. Frances Cox, Manager Special Certification Office, Southwest Region
(Title)
FAA Form 8110-2-1(10-69) Page 2 of 2
Number SA5878SW Date of Issuance: February 01, 1985
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.