STC SA6067NM

Supplemental type certificate · Aero Improvements

Holder
Aero Improvements · United States
Status
Current · Reissued
Status date
February 2, 1994
Applied
July 27, 1993
Product
Aircraft · Small Airplane
Certification basis
Part 21

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of an auxiliary cabin door latch pin and socket

What the certificate saysOCR

This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA6067NM This certificate issued to: Aero Improvements 2350 Oakleaf Canyon Road Walnut, California Part* of the * Regulations.

Original Product - Type bertificate Number: *See attached FAA Approved Model List (AML) No. SA6067NM for Make: * list of approved airplane Model: * models and applicable airworthness regulations.

Description of Type Design Change: Installation of an auxiliary cabin door latch pin and socket in accordance with Aero Improvements Master Drawing Lists on AML No. SA6067NM, dated January 19, 1994, or later FAA approved revision.

Limitations and Conditions: The approval of this modification applies to the above noted airplane model series only. This approval should not be extended to other specific airplanes of this model series on which other approved modifications are incorporated, unless it is determined that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that aircraft.

w of the Federal Aviation Administration .

Date of Application: JUly 27, 1993 Jule issued: February 2, 1994 Date of Issuance: October 29, 1993 Jate uvended:

EDERAL AVIATION OMINISTRA TION Los Angeles Aircraft Certification Office Manager, Airtrame Dig Branch (Title)

47.

FAA APPROVED MODEL LIST (AML) NO. SA6067NM

AERO IMPROVEMENTS FOR

INSTALLATION OF AUXILIARY CABIN DOOR LATCH PIN & SOCKET Make: January 19, 1994 MASTER

DRAWING LIST

ORIGINAL CERTIFI- AML ITEM AIRPLANE MAKE MODEL AIRPLANE CERTIFICATE TYPE CATION BASIS Number Rev & Date AMENDMENT DATE 1 Cessna H,I,J,K,L, 310,310A, B C,D, E, F,G, 3A10 & Amendments in TCDS 3A10 Part 23 9328 10-13-93 "А" N, P,Q E310H, J, T310P, Q & 310J-1 2 Beech 33,А33,B33, С33, СЗЗА, Е33, Е33А, ЗА15 in TCDS 3A15 & Amendments Part 23 9334 10-30-93 NC E33C, F33 F33A, F33C G33, H35,033 K35,M35,N35 P35, S35,V35 V35A, V35B, 36,A36, A36TC, B36TC Beech 35R, F35, G35 35,A35,833 C35,D35,E35 A777 & Amendments In TCDS A77 CAR 03 9334 10-30-93 NC Beech 55,A55,B55 3A16 Part 23 9335 10-30-93 NC B55A, B55B, С55, С55А, D55, D55A, E55, E55A 5 Beech 58, 58A, 58PA 58TC, 58TCA A23CE Part 23 & Amendments 9335 10-30-93 NC in TCDS A23CE FAA Approved: Manager, Airframe Branch Los Angeles Aircraft Certification

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 71

MakeModelData sheet
Beechcraft Corporation35A-777
Beechcraft Corporation35-333A15
Beechcraft Corporation35-A333A15
See all 71 models