What it approves
Installation of S-TEC System 65 two axis flight guidance system, Model ST-346.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
£ota rf 9amca department of Transportation— jFederal atriation Administration Supplemental 'Cgpe Certificate <SU4m>V€'l*' SA6093SW-D — fc^L^iiy ^f..^^ S-TEC Corporation Rt. 4, Bldg. 946 Welters Industrial Complex Mineral Wells, Texas 76067 r»rrtjT«« -^fg •*•"-• fnt—fff f'-r if^r fai^ r -r^yrt-j/rr- jnf&f/nrinaArw/uvftt-itA fAt fifr"'Arfa~--*- < ClVll Air A7CE Cessna 401, 401A, 401B, 402A, 402B, and 402C Installation of S-TEC System 65 Two Axis Automatic Flight Guidance System, Model ST-346, according to Bulletin No. 446, Revision 3, dated 8-09-91 and Master Drawing List No. 92396, Revision C, dated 8-09-91 and/or later FAA Approved revisions of the above data (28 Volt System).
1. FAA Approved Supplement to Pilot's Operating Handbook and/or FAA Approved Airplane Flight Manual, P/N 89704, dated 10-17-86 is required for Cessna Model 402C and/or later FAA Approved revisions of the above supplement.
(See Continuation Sheet, Page 2, a part of this STC.)
.^^,<fci4^^ 2-10-89, 8-22-91 Revision 2 William 'CK Thomas HAS fst.aff Coordinator. DAS 5 SW (Title) _
nil ttrlifeate may 6r traiafmtd in mcnidantt witti FAR 21.17.
United Statrs of 3ntrea Bepartmcnt of Transportation— jftdtral SUnation Administration Supplemental ICgpe Certificate(Continuation Sheet) SA6093SW-D, Revision 2 Limitations and Conditions (con't.)
2. FAA Approved Supplement to Pilot's Operating Handbook and/or FAA Approved Airplane Flight Manual, P/N 89704-1, dated 2-10-89 is required for Cessna Model 402C and/or later FAA Approved revisions of the above supplement.
3. FAA Approved Supplement to Pilot's Operating Handbook and/or FAA Approved Airplane Flight Manual, P/N 89704-2, dated 8-22-91 is required for Cessna Model 402C and/or later FAA Approved revisions of the above supplement.
4. FAA Approved Supplement to Pilot's Operating Handbook and/or FAA Approved Airplane Flight Manual, P/N 89813, dated 2-10-89 is required for Cessna Models 401, 401A, and 401B and/or later FAA Approved revisions of the above supplement.
5. FAA Approved Supplement to Pilot's Operating Handbook and/or FAA Approved Airplane Flight Manual, P/N 89813-1, dated 8-22-91 is required for Cessna Models 401, 401A, and 401B and/or later FAA Approved revisions of the above supplement.
6. FAA Approved Supplement to Pilot's Operating Handbook and/or FAA Approved Airplane Flight Manual, P/N 89939, dated 8-22-91 is required for Cessna Models 402A and 402B and/or later FAA Approved revisions of the above supplement.
7. Compatibility of this modification with other previously approved modifications must be determined by the installer.
.I'D uiteTiition of this certificate ii punishable by a fine of not exceeding SI,000, or imprisonment not exceeding 3 vetirs, at hnih PAA FORM anu-j-i (io-«9> This catificaU may bi transferred in accordance urtth I'AK .'/.I?
INSTRUCTIONS: The transferendowment below m.y be u,ed «o notify the appropriate FAA Regional Office of the trantfer of thU Supplemental Type Certificate.
The FAA will reiiiue the certificate in the name of the traniferee and forward it 10 him.
TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number to (Name of transferee).
(Address of transferee). »nd strtet) (On. Slate, tnd ZIP c*tt) from (Name of grantor) (Print or type).
(Address of grantor) Extent of Authority (if licensing agreement):
Signature of grantor (In ink):
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.