STC SA615NE

FAA Form 8110-2 (5/14) Page 1 of

Part of the

Signature

Title SA615NE Griggs Aircraft Refinishing, LLC.

172 Runway Road Tunkhannock, PA 18657 Civil Air / Federal Aviation Regulations.

3/23

1. Installation of an 18 gallon Fuel tank in the Aft Baggage Compartment and Fuel Transfer System in accordance with O&N Installation Drawing List 172100, Report No. ON-1012 Revision A, dated June 1, 1989.

2. O&N Supplemental Flight Manual No. 17, Revision A, FAA Approved June 12, 1989, is required for Cessna Models 172F, G, H, I, K, L, M, and N, S/N 17254893 through 17271034 (1978).

(See Description of Type Design Change continued on Page 3 of 3)

1. Eligible on airplane serial numbers as identified on the AFM's listed above.

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

Gaetano Sciortino Manager New York Aircraft Certification Office Cessna Aircraft Company 172F, G, H, I, K, L, M, N, P and Q June 8, 2015, September 4, 2015, October 15, 2015, June 22, 2016, January 13, 2017 March 21, 1988 October 18, 1988 3A12 3

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee)

From (Name and address of grantor)

3 SA615NE

FAA Form 8110-2 (5/14) Page 3 of

3 Date Reissued: January 13, 2017

Description of Type Design Change (continued):

3. O&N Flight Manual Supplement No. 16, FAA approved October 18, 1988, is required for Cessna Models 172N and 172P, S/N 17271035 through 17276673 (1979 and On).

4. O&N Flight manual Supplement No. 18, FAA approved October 18, 1988, is required for Cessna Model 172Q.

-----------END-----------

SA615NE