What it approves
Modification of powerplant installation, fuselage (other than weld assembly), wing flaps, and tail wheel installation to conform to the designs of the corresponding installations, assemblies, and components of the Model S-1B2 airplane.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This Certificate issued to
Part 04* of the Civil Air Regulations.
*Complete certification basis is specified in Aircraft Specification No. A-754, Revision 8.
Modification of powerplant installation, fuselage (other than weld assembly), wing flaps, and tail wheel installation to conform to the designs of the corresponding installations, assemblies, and components of the Model S-1B2 airplane in accordance with Arctic Aircraft Company, Inc., Report No. S-1B1 S/N 240, page 2 of 2, Drawing List, original issue dated November 7, 1977, or later FAA approved revision.
Limitations and Conditions: Data pertaining to these design changes are considered inadequate for duplication in other airplanes. The approval of these design changes is limited to Interstate S-1B1 airplane S/N 240, only. No additional modifications of this type are to be approved solely by reference to this Supplemental Type Certificate or its supporting data. 14 CFR Part 43 is adequate to insure continued airworthiness of this modification.
STOL Aviation LLC c/o Tom Csatari 8 South Park Street Lebanon, N.H. 03766 754 Make: Interstate Model: S-1B1
Date reissued: May 08, 2000;
October 31, 2008
Date amended: May 08, 2000
( Signature) Gregory J. Holt Manager Anchorage Aircraft Certification Office
( Title) Date of application: November 04, 1977
Date of issuance: November 09, 1977
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Interstate Engineering & Type Design Company Inc. | S-1B1 (Army L-6; XL-6) | A-754 |