What it approves
Fabrication and installation of Stoddard Model 3 wing tank per Stoddard Aero Service Drawing List No. 68, dated February 7, 1975, or later Federal Aviation Administration approved revision.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SA68AL
This certificate, issued to Cub Crafters, Inc.
1918 South 16th Avenue Yakima, WA 98903-1212
Part 4a of the Civil Air Regulations.
Original ProductType Certificate Number: 691 Make: Piper Model: J-3C-65, J-3C-65S, PA-11, PA-11S
Description of the Type Design Change: Fabrication and installation of Stoddard Model 3 wing tank per Stoddard Aero Service Drawing List No. 68, dated February 7, 1975, or later Federal Aviation Administration approved revision.
Limitations and Conditions: The approval of this change in type design applies basically to Piper J-3Cs and PA-11s only. This approval should not be extended to other aircraft of these models on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those previously approved modifications will introduce no adverse effect upon the airworthiness of that aircraft. This determination should include consideration of significant changes in weight distribution such as an increase in the fixed disposable weight in the fuselage. The approval of this modification applies to the above noted airplane model series only.
If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application: May 24, 1963 Date reissued: May 14, 1998; January 26, 2012 Date of issuance: January 16, 1964 Date amended: February 7, 1975
(Signature) Acting Manager, Seattle Aircraft Certification Office (Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.