What it approves
Installation of S-TEC System 65, two axis automatic flight guidance system, Model ST-395.
What the certificate saysOCR
This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SA71465W-D This certificate issued to: S-TEC Corporation Rt. 4, Bldg. 946 Wolters Industrial Complex Mineral Wells, TX 76067 Certifies that the change in the type design for the following product with the limitations und conditions therefor as specified hereon meets the airworthiness reguirements of Part 23 of the Federal Air Regulations.
Original Product -Typebertificate Number: A16CE Make: CESSNA Model: 207A AND T207A Description of Type Design Change:
Installation of S-TEC System 65 Two Axis Automatic Flight Guidance System, Model ST-395, according to Bulletin No. 495, dated 12-03-86 and Master Drawing List No. 92412, dated 12-03-86 and/or later FAA Approved revisions of the above data (28 Volt System).
1. FAA Approved Supplement to Pilot's Operating Handbook and/or FAA Approved Airplane Flight Manual, P/N 89727, dated 4-06-87 is required for Cessna Models 207A and T207A, S/N 20700483 and Up and/or later FAA Approved revisions of the above supplement.
(See Continuation Sheet, Page 2, a part of this STC.)
Date of Application: 2-04-87 Date Reissued:
Date of Issuance: 4-06-87 Date Amended:
FEDERAL AVIATIO Any direction of the Idorinistrato (Signature ) PAINISTERS O Harold W. Holdeman DAS Staff Coordinator, DAS 5 SW (Title)
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate (Continuation Sheet) Number SA7146SW-D Limitations and Conditions: (con't)
2. FAA Approved Supplemental Flight Manual, P/N 89/26, dated 4-06-8/ 1s required for Cessna Models 207A and T207A, S/N 20700363 through S/N 20700482 and/or later FAA Approved revisions of the above supplement.
3. Compatability of this modification with other previously approved modifications must be determined by the installer.
XXXXXXXXXX
TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number to (Name of transferee) (Address of transferee) (Number and street) (City, State, and Z1P code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street) (City, State, and ZIP code) Exent of Authority (if licensing agreement) :
Signature of grantor (In ink) :
Pade 2 ot :
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.