What it approves
Installation of S-TEC System 60 two axis automtic flight guidance system with optional autotrim, Model ST-095.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Hntttd foot ^Department or transportation —federal atiiation administration Supplemental 'Cgpc Certificate SA7201SW-D S-TEC Corporation Rt. 4, Bldg. 946 Wolters Industrial Complex Mineral Wells, Texas 76067 y^Jr\&j!&6^^ 3 C 1 V 1 1 Air A4EU Reims-Cessna F172F, F172G, F172H, F172K and F172L Installation of S-TEC System 60 Two Axis Automatic Flight Guidance System with Optional Autotrim, Model ST-095, according to Bulletin No. 198, Revision 4, dated 10-31-89 and Master Drawing List No. 92129, Revision D, dated 10-31-89 and/or later FAA Approved revisions of the above data (14 Volt System).
1. FAA Approved Supplemental Flight Manual, P/N 89830, dated 12-01-89 is required and/or later FAA Approved revisions of the above supplement.
2. Compatabi]ity of this modification with other previously approved modifications must be determined by the installer.
11-09-89 12-01-89 ( Signature} Harold W. Holdeman DAS Staff Coordinator, DAS 5 SW (Title)
17.
INSTRUCTIONS : The transfer endorsement below may be used to notify the appropriate FAA Regional Office of the transfer of this Supplemental Type Certificate.
The FAA will reissue the certificate in the name of the transferre and forward It to him.
TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number to (9&ne of transferee) _ (Address of transferee) (gamier and street) (City, State, andZlf code) f grantor) (Print or type) (Address of grantor) (y^anBer and street) (City, State, andZlT code) Exent of Authority (if licensing agreement) :
Signature of grantor (In inQ : __ ___ _ _ _ _ _ _ Page 2 of 2
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.