What it approves
Installation of a replacment landing gear retraction link.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
tinted £tatu of amenta Bepartmcnt of ^transportation — federal Sttriation administration Supplemental 'Cjipe Certificate <SlwmV€V SA7891SW 190-1270 Mr<> William D. Walker 606 Red Bluff Road Pipe Creek, Texas 78063 y^ s 4g. ^^A^ ClVll Air *-/tean&a&(rn& .
: A~766 Globe Swift, Temco Swift GC-1A, GC-1B in&e :(7 Installation of a replacement landing gear retraction link in accordance with William Walker Drawing GC1B-202 dated June 2, 1990 and Landing Gear Installation Instructions dated October 15, 1989, or later FAA approved revisions „ Compatibility of this modification with previously installed equipment must be determined by installer.
xi^^ Szdmvru : May 30, 1990 September 21, 1990 Atork R. SchillfSgTtianager Special Certification Office (Title)
fAAfcxu. 8110-2(10-68)
TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number to (Name of transferee) (Address of transferee) (Number and street) (City, Xlalf, and <7P [ from (Name of grantor) (Print or type) (Address of grantor) (.Wttnififr and street) ( ('.lit. Stale, and ~_IP rode) Extent of Authority (if licensing agreement):
Signature of grantor (In ink):
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.