What it approves
Installation of a Litton LTN-92 intertial navigation system (INS).
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This Certificate issued to Northrop Grumman Systems Corporation 21240 Burbank Blvd.
Woodland Hills, California 91367-6675 Part 25 of the Federal Aviation Regulations Original Product Type Certificate Number :
A22WE The Boeing Company DC-10-40 Description of Type Design Change: Installation of a Litton LTN-92 Inertial Navigation System (INS) in accordance with FAA Approved Litton Top Drawing List No. 454050-10, Revision “N/C”, dated September 27, 1994, or later FAA approved revision. FAA approved Airplane Flight Manual Supplement No. 464182 for Douglas DC-10-40 airplane, dated December 8, 1994, or later FAA approved revision is required as part of this installation.
Limitations and Conditions: This approval should not be extended to other specific airplanes of this model series on which other than noted previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of that aircraft. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : September 20, 1994
Date of issuance : January 12, 1995
Date reissued : April 12, 2016
(Signature) Supervisor, Technical & Administrative Support Staff (Title)
NOTE:
DO NOT DELETE THIS PAGE.
DO NOT ADD ANY DATA TO THIS PAGE.
THIS PAGE IS FOR PAGE NUMBERING PURPOSES, PLEASE DISCARD PRINTED COPY.
Number (STC No.)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Boeing Company | DC-10-40 | A22WE |