What it approves
Installation of a landing gear hydraulic pressure indicating system.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Jtlntttb j&tates ©f America of "Qlranspartattott - ^febcral (A&tattmt (AimtmtBtratton uppkmetttal (Esrttftcate SA8071SW Benz Airborne Systems 2400 Handley - Ederville Road Fort Worth, TX 76118 23 Federal Aviation A24CE Beech 300, B300 Installation of a landing gear hydraulic pressure indicating system in accordance with Benz Airborne Systems drawing list BAS-001-001-003-300LG, Rev. B, dated 12 Nov 90, or later FAA approved revision.
Airplane Flight Manual Supplement dated August 9, 1991, or later FAA approved revision is required. Compatibility of this modification with previously installed equipment must be determined by installer.
f *4> asuedfo f ^. 0 ,e/aSa urfecA, i£ io*,. January 29, 1990 'eMwtnce .• August 09, 1991 ^Ewfe/*%»***/.• March 18, 1999 (Signature) S. Frances Cox, Manager Special Certification Office, Southwest Region _—— Any ^-Iteration o/ certificate is punishable by a fine o/ not exc««dincr #1,000, or imprisonment not exceeding 3 years, or both.
INSTRUCTIONS: The transfer endorsemenl below may be used to notify the appropriate FAA Regional Office of the transfer of this Supplemental Type Certificate The FAA will reissue the certificate in the name of the transferee and forward it to him
TRANSFER ENDORSEMENT Transfer the ownership of Supplemental Type Certificate Number to (Name of transferee) (Address of transferee) (Number end street) (City, Slate, and £IP code) from (Name of grantor) (Print or type).
(Address of grantor) (Miintftfr and street) ( C.ilv. Xlale. tmrl ^IP rode I Extent of Authority (if licensing agreement):
Signature of grantor (In ink):
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.