STC SA8193NM-D

SA8193NM-D

Learjet Inc.

One Learjet Way Wichita, Kansas 67209 25*

. *Certification basis is set forth in Type Certificate Data Sheet T00003NY

T00003NY Bombardier Aerospace BD-700-1A10

: Installation of wiring provisions and structural provisions for a Wing Collision Avoidance System, in accordance with Master Drawing List GC31005001, revision B dated 10/03/01 or later FAA approved revision.

: 1) The installation should not be incorporated in any aircraft unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of the aircraft. 2) The approval of this modification applies to the above noted airplane model series only. 3) A copy of this STC must be included in the permanent records of the modified aircraft. 4) If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the othe r person written evidence of that permission. 5) The equipment for which these provisions are intended, have not been certified.

Additional FAA approval is required for the installation of these equipment and must be evaluated to assure satisfactory compliance with the applicable airworthiness standards.

May 24, 2000

October 03, 2001

December 23, 2015

Original signed by Keith Johnston ___ (Signature) Keith Johnston ODA administrator ODA-501508-CE, Learjet Inc.

Wichita, Kansas (Title)

NOTE:

DO NOT DELETE THIS PAGE.

DO NOT ADD ANY DATA TO THIS PAGE.

THIS PAGE IS FOR PAGE NUMBERING PURPOSES, PLEASE DISCARD PRINTED COPY.