What it approves
Remove existing starter-generators and install starter-generator P/N 300SGL127Q-1/300SGL127Q-3.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2(10-68) Page 1 of 2 United States of America Department of Transportation -- Federal Aviation Administration Supplemental Type Certificate Number SA822NE Reissued on July 21, 2004 to supercede the original STC which has been lost, misplaced or stolen.
This certificate issued to
Part 25 of the Federal Aviation Regulations.
Description of Type Design Change: Remove existing starter-generator and install Aircraft Parts Corporation (APC) startergenerator P/N’s 300SGL127Q-1/300SGL127Q-3 in accordance with Aircraft Parts Corporation “Installation Instructions DeHavilland Dash 8”, Drawing No. 300SGL1177-1, Revision F, dated April 10, 1996.
1. Brushes must be replaced with APC P/N 300SGL1009-5 and P/N 300SGL1009-7 only and seated in accordance with paragraph 13, “Brush Seating APC Brushes in APC High Speed Starter-Generator,” of APC “Installation Instructions DeHavilland Dash 8,” Drawing No. 300SGL1177-1, Revision F, dated April 10, 1996.
2. Brushes are life limited parts whose service life must be calculated in accordance with Paragraph 14, “Data Which Allow You to Calculate Your Brush Life for Your APC Starter-Generators in Your Aircraft,” of APC “Installation Instructions DeHavilland Dash 8” Drawing No. 300SGL1177-1, Revision F, dated April 10, 1996.
Skurka Aerospace, Inc.
4600 Calle Bolero, Box 2869 Camarillo, CA 93011 A13NM Make : deHavilland Model : DHC-8-100 Series and DHC-8-300 Series
Date of application : September 22, 1989
Date of issuance : January 24, 1991
Date reissued : July 21, 2004, August 9, 2004, September 7, 2004, July 30, 2009
Date amended : February 15, 1991, August 6, 1992, May 22, 1996
( Signature) Anthony Socias Manager New York Aircraft Certification Office
Number SA822NE (Date of Reissuance: August 9, 2004)
Limitations and Conditions : (Continued)
3. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.
4. The installer must determine whether this design change is compatible with previously approved modifications.
...END...
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.