What it approves
Installation of an aluminum dorsal fin.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA Form 8110-2(10-68) Page 1 of 2 rNumber SA8688SW This Certificate issued to Central Flying Service Adams Field, 1501 Bond Little Rock, AR 72202
Part * of the * Regulations.
Original Product Type Certificate Number : * *See Limitations and Conditions Make : *
Installation of an aluminum dorsal fin in accordance with Midcoast-Little Rock, Inc. Drawing List AD930003, Revision E, dated January 17, 1995, or later FAA approved revision.
Compatibility of this modification with previously installed equipment must be determined by installer. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : April 13, 1992
Date of issuance : September 24, 1993 Date reissued : October 03, 2005
Date amended : 3/15/94; 6/1/94; 4/28/95 Revision 3
( Signature) S. Frances Cox, Manager Special Certification Office, Southwest Region
(Title)
FAA Form 8110-2-1(10-69) Page 2 of 2
Number SA8688SW Date of Issuance: September 24, 1993 Date Amended: April 28, 1995 Reissuance Date: October 3, 2005
The following is the model eligibility for this modification:
Type Certificate Applicable Make & Model Data Sheet Regulation Cessna 500, 550, S550, 560 A22CE FAR 25
Cessna 501, 551 A27CE FAR 23
-END-
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.