What it approves
Installation of Continental IO-470-N engine and Flottorp F12A-3/8400-2 propeller.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This Certificate issued to D’SHANNON PRODUCTS, LTD.
1309 County Road 134 Buffalo, MN 55313 Part 3 of the Civil Air Regulations.
3A15
Beech
35-B33 Description of Type Design Change: Installation of Continental 10-470-N engine and Flottorp F12A- 3/8440-2 propeller in accordance with Cutter Aviation, Inc. installation Instructions CA1 33.002. Cutter Aviation, Inc. FAA Approved Airplane Flight Manual Supplement dated March 22, 1965, is required with this installation.
Limitations and Conditions : This approval should not be extended to other specific airplanes of these models on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this change and any of thos e other previously approved modifications will introduce no adverse effect upon the airworthiness of that airplane. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : December 10, 1964
Date of issuance : March 22, 1965
Date reissued : March 11, 1981, February 6, 2015
(Signature) Supervisor, Technical and Administrative Support Staff
NOTE:
DO NOT DELETE THIS PAGE.
DO NOT ADD ANY DATA TO THIS PAGE.
THIS PAGE IS FOR PAGE NUMBERING PURPOSES, PLEASE DISCARD PRINTED COPY.
Number (STC No.)
Number
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Beechcraft Corporation | 35-B33 | 3A15 |