What it approves
Installation of a "Provisions Only" Audio Preview/Music on Hold System
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Number SA9196SC-D This Certificate issued to L-3 Communications Integrated Systems, L.P.
10001 Jack Finney Blvd.
Greenville, TX 75402 Part 25 of the Federal Aviation Regulations.
Original Product Type Certificate Number: A20WE *SEE PAGE 3 Make : Boeing Model : 747-2G4B Description of Type Design Change: Installation of a “Provisions Only” Audio Preview/Music on Hold System in accordance with L-3 Communications Integrated Systems Sealed Drawing List SDL 6545-3, Revision NC dated 18 August 2003, or later FAA approved data.
Date of application: 14 August 2003 Date reissued :
Date of issuance : 27 August 2003 Date amended : March 22, 2013 – Amdt 1 By direction of the Administrator
(Signature) Michael E. Hopper ODA-750173-SW Administrator, Alternate
(Title)
Transfer the ownership of Supplemental Type Certificate Number
to (Name of transferee) (Address of transferee) (Number and street)
(City, State, and Zip code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street)
(City, State and Zip code) Extent of Authority (if licensing agreement):
Signature of grantor (In ink):
FAA Form 8110-2-1(10-69) Page 3 of 3
Number SA9196SC-D Amendment 1 Date of Issuance: 22 March 2013
Limitations and Conditions: (Continued)
1. The equipment for which these provisions are intended has not been certified. Additional FAA approval is required for the installation of this equipment and must be evaluated to assure satisfactory compliance with the applicable airworthiness standards.
2. Compatibility of this design change with previously approved modifications must be determined by the installer.
3. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
4. Based on 14 CFR §§ 21.115 and 21.101, the certification basis for the Boeing 747-2G4B aircraft is as follows:
a. The type certification basis fo r Boeing series airplanes is shown on TCDS A20WE for parts not changed or not affected by the change.
b. The certification basis for parts changed or aff ected by the change since the reference date of application, 14 August 2003, is as shown in TCDS A20WE with the exception that 25.981(a)(3) is at amendment 25-102.
5. When installed, airplanes with this STC are limited to operations excluding those of an Air Carrier.
Specifically, no operations under 14 CFR 121, 14 CFR 129 or any foreign Air Carrier are permitted.
--------------------------------------------------END----------------------------------------------
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| The Boeing Company | 747-200B Series | A20WE |