STC SA930SO

This certificate issued to

Part 3 of the Civil Air Regulations.

Installation of Beech Aircraft wing tip assemblies in accordance with Beryl D’Shannon Aviation Specialties, Inc., Drawing B1990, dated December 15, 1976, or later FAA approved revision.

Limitations and Conditions: The approval of this change in type design applies basically to Beech models shown only.

This approval should not be extended to other aircraft of this same model on which other previously approved modifications are incorporated unless it is determined by the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect on the airworthiness of that aircraft.

D’Shannon Products, Ltd.

1309 County Road 134 Buffalo, MN 55313 A-777 – Beech Aircraft Models A35 through G35, 35, and 35R 3A15 – Beech Aircraft Models H35, K35, M35, N35, P35, V35, V35A, V35B, 36, A36, 35-33, 35-A33, 35- B33, 35-C33, E33, E33A, E33C, F33, F33A, F33C, G33 Original Product --Type Certificate Number:

Date reissued : August 16, 2011 Date amended :

( Signature)

Melvin D. Taylor, Manager Atlanta Aircraft Certification Office

( Title)

Date of application : June 21, 1976

Date of issuance : June 1, 1977

INSTRUCTIONS: Thc transfer endorsement below may be used to notify the appropriate FAA Regional Office of the transfer of this Supplemental Type Certificate.

The FAA will reissue the certifi cate in the name of the tran sferee and forward it to him.

Transfer the ownership of Supplemental Type Certificate Number

to (Name of transferee)

(Address of transferee) (Number and Street)

(City, State, and ZIP code)

from (Name of grantor) (Print or type)

(Address of grantor) (Number and Street)

(City, State, and ZIP code)

Signature of grantor (In ink):