STC SA936CE

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificat e may be transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21.47. The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the proper ty of the STC holder.

FAA Form 8110-2 (5/14) Page 1 of This certificate issued to:

Part of the

Signature

Title 2 SA936CE Curry Aviation, LLC 616 N. Palmetto Street Leesburg, FL 34748 Civil Air Regulations.3 Installation of STOL Kit (wing leading edge cuffs, drooped tips, stall fences and vortex generators on rear engine lower cowling). Data required:

1. FAA Approved STOL-Craft Drawing List No. 2, dated January 24, 1990, or later FAA approved revision.

1. Compatibility of this design with previously approved modification must be determined by the installer.

2. Delete all references to intentional spins from the utility category placard, and adjacent to it add a new placard which reads: "INTENTIONAL SPINS PROHIBITED."

for Paul Nguyen Manager, Central Certification Branch Compliance & Airworthiness Division Aircraft Certification Service Textron Aviation (Cessna) 336 5/26/1977, 12/16/2022May 29, 1973 June 22, 1973 A2CE

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificat e may be transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21.47. The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the proper ty of the STC holder.

FAA Form 8110-2 (5/14) Page 2 of

To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):

2 SA936CE