What it approves
Installation of STOL kit (wing leading edge cuffs, drooped tips and vortex generators).
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificat e may be transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21.47. The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the proper ty of the STC holder.
FAA Form 8110-2 (5/14) Page 1 of This certificate issued to:
Part of the
Signature
Title 2 SA956CE Curry Aviation, LLC 616 N. Palmetto Street Leesburg, FL 34748 Federal Aviation Regulations.23 Installation of STOL Kit (wing leading edge cuffs, drooped tips, and vortex generators). Data required:
1. FAA Approved STOL-Craft Drawing List No. 2052, dated July 31, 1973, or later FAA approved revision.
1. Compatibility of this design with previously approved modification must be determined by the installer.
2. Intentional spins prohibited.
for Paul Nguyen Manager, Central Certification Branch Compliance & Airworthiness Division Aircraft Certification Service Textron Aviation (Cessna) 177, 177A 5/26/1977, 12/16/2022August 2, 1973 September 19, 1973 A13CE
United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate This certificat e may be transferred or made available to third persons by licensing agreements in accordance with 14 CFR 21.47. The STC’s supporting documentation (drawings, instructions, specifications, flight manual supplements, etc.) is the proper ty of the STC holder.
FAA Form 8110-2 (5/14) Page 2 of
To (Name and address of transferee) From (Name and address of grantor) Extent of Authority (if licensing agreement):
2 SA956CE
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.