What it approves
Installation of Interior and Avionics System
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
Par t 25 of the Federal Aviation R egulations.
Original Product Type Certificate N umber:
M ake:
M odel:
Installation of Interior and Avionics System in accordance with IAL Modification List No. ML100107 Rev. B, dated December 16, 1991.
1. The Canadian Department of Transport approved Flight Manual Supplement CL600-IAL-189, Scott Gaseous Oxygen System, Original Issue, dated October 30, 1991is required.
Bombardier Completion Center Inc.
200 Cote Vertu West Dorval, Quebec H4S 2A3 Canada
A21EA Bombardier, Inc.
CL-600-2B16 S/N 5094
Date of application : December 16, 1991
Date of issuance : April 13, 1992 Date reis sued : February 4, 2000
B y direction of the A dministrator
(Signature) Gaetano Sciortino Manager New York Aircraft Certification Office
(Title)
FAA Form 8110-2-1(10-69) Page 3 of 3
N umber SA963NE Date Reissued: February 4, 2000
2. The Canadian Department of Transport approved Flight Manual Supplement CL600-IAL-190, Sundstrand Mk. V Ground Proximity Warning System, Original Issue, dated October 30, 1991is required.
3. The Canadian Department of Transport approved Flight Manual Supplement CL600-IAL-191, Smoke Detector- Baggage Compartment, Original Issue, dated October 30, 1991 is required.
4. The following maintenance and inspection must be complied with:
a. Maintenance Procedure of Gaseous Oxygen System, IAEL Report No. T.M0706-0004, Rev. F, dated August 12, 1991.
b. Inspection of AFT Overboard Servicing Installation, IAEL Report No. T.M0375-0010, dated June 28, 1988.
c. Inspection of AFT G.E. Drain Mast Installation, IAEL Report No. T.M0375-0459, Rev. B, dated June 10, 1991.
5. You cannot use descriptive data about this design change to duplicate other products. This approval is limited to only the installation made in Bombardier, Inc. Model CL-600-2B16 Serial No. 5094. This STC does not permit manufacturing of parts for multiple installations.
……….END……….
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.