What it approves
Modification made per FAA sealed summary, Drawing 25600, Sheet 3.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This Certificate issued to Staggerwing Museum Foundation, Inc.
560 Old Shelbyville Highway Tullahoma, TN 37388 Part 3 of the Civil Air Regulations, effective November 13, 1945.
A-765 BEECH 3N, 3NM, 3TM, D18S, C45G, C45H, TC45G & H, SNB-5 Description of Type Design Change: Modification made per FAA Sealed Summary Drawing 25600, Sheet 2.
Limitations and Conditions: The approval of this change in type design applied basically to the noted aircraft models only. This approval should not be extended to other specific airplanes of these models on which other previously approved modifications are incorporated, unless it is determined that the installer that the interrelationship between this change and any of those other previously approved modifications will introduce no adverse effect upon the airworthiness of the airplane. Max gross weight 9465 lbs. FAA Approved Airplane Flight Manual dated June 15, 1965, and revised October 16, 1968, required. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : February 3, 1965
Date of issuance : June 16, 1965
Date reissued: April 28, 1977; September 3, 2004
Date amended : October 16, 1968
( Signature)
Manager, Technical & Administrative Support Staff, Los Angeles Aircraft Certification Office ( Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.