STC SE00561NY

IMPORT SE00561NY Aerotec Engines Limited 740 Windgate Drive Beaver Bank, Nova Scotia Canada B4G 0A6 Part 13 the Civil Air Regulations 3E1

CONTINENTAL AEROSPACE TECHNOLOGIES IO-470-D, IO-470-E, IO-470-F, IO-470-H, IO-470-M, IO-470-N, IO-470-S,

1. Replacement of Fuel Injection System with Carburetted System must be done in accordance with Norland Drawing No. 1, dated May 28, 1996, or later Transport Canada Civil Aviation (TCCA) approved revision.

2. Maintenance of the modified IO-470 engine must be performed in accordance with Norland Continuing Airworthiness Inspection Requirements, TCCA accepted May 28, 1996, or later TCCA accepted revision.

1. If the holder agrees to permit another person to use this certificate to alter a product, the holder must give the other person written evidence of that permission.

(Limitations and Conditions Continued on Page 3 of 3) August 30, 1996 April 15, 2021 February 10, 1997 Timothy J. Hadsall Acting Manager, New York ACO Branch Compliance & Airworthiness Division Aircraft Certification Service 3

IMPORT SE00561NY SE00561NY 3

IMPORT SE00561NY Date Reissued: April 15, 2021

2. The installer must determine whether this design change is compatible with previously approved modifications.

3. This STC is applicable to all serial numbers for this Make and Model.

4. This approval is only applicable to the type/model or aeronautical product specified therein. Prior to incorporating this modification, the installer shall establish that the interrelationship between this change and any other modification(s) incorporated will not adversely affect the airworthiness of this modified product.

----------END---------- 3 3