What it approves
Remove and replace JT3D main accessory gearbox housing split line gasket with PTM International gasket.
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
FAA FORM 8110-2(10-68) PAGE 1 of 1 PAGES Number SE01110AT This certificate issued to Jet Avion Corporation 3000 Taft Street Hollywood, FL 33021
Part 13 of the Civil Air Regulations.
Original Product--Type Certificate Number : 1E8 Make : P&W Model : JT3D
Description of Type Design Change: Remove and replace JT3D(All Models) main accessory gearbox housing split line gasket with PTM International gasket per PTM International drawing number PT100002, Revision C dated May 03, 1996 or later FAA approved revision.
Limitations and Conditions: This approval should not be extended to other engines of this model on which other previously approved modifications are incorporated, unless it is determined by the installer that the interrelationship between this change and any other previously approved modifications will produce no adverse effect upon the Airworthiness of that engine. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written ev idence of that permission.
Date of application : December 01, 1995
Date of issuance : August 09, 1996 Date reissued : November 16, 1998; September 08, 2006
( Signature) Melvin D. Taylor Manager Atlanta Aircraft Certification Office
(Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Pratt & Whitney Division | JT3D Series | 1E8 |