STC SE01243WI

FAA FORM 8110-2(10-68) PAGE 1 of 3 Number SE01243WI This certificate issued to Barron Aviation, LLC 30530 Hwy. Y Perry, MO 63462

Part ’ of the ’ Regulations.

’See attached FAA Approved Model List (AML) No. SE01243WI for list of approved engine models, and applicable airworthiness regulations.

Installation of Barron Aviation intake tube drain kits on the engines listed on the attached FAA Approved Model List (AML) No.

SE01243WI, dated April 26, 2004, or later FAA Approved revision.

Data Required for Installation:

1. Barron Aviation Installation and Operation Instructions, Doc. No. BA-3817-IO, Rev. (0), dated 2-26-04, or later FAA Approved revision.

2. Barron Aviation Parts List, Doc. No. BA-3817-PL, Rev. (0), dated 2-26-04, or later FAA Approved revision.

3. Barron Aviation ICA Checklist Report, Doc. No. ICA3817-R, Rev. (0), dated 2-25-04, or later FAA Approved revision

1. This is a non-interference approval and shall not interfere with engine operation, other approved engine systems and/or components.

2. Compatibility of this design change with previously approved modifications must be determined by the installer.

3. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

4. Approval of this change in type design applies to the above model engines only.

5. A copy of this certificate and FAA Approved Model List must be maintained in the airplane permanent records.

This certificate and the supporting data, which is the basis for approval, shall remain in effect until surrendered, suspended, revoked or a termination date is otherwise established by the Administrator of the Federal Aviation Administration.

Date of application: October 21, 2003

Date of issuance: July 13, 2004 Date reissued:

( Signature) Joel M. Ligon Program Manager Wichita Aircraft Certification Office

(Title)

FAA FORM 8110-2-1(10-69) PAGE 2 of 3

Transfer the ownership of the Supplemental Type Certificate Number to (Name of transferee) (Address of transfer) (Number and street)

(City, State, and Zip code) from (Name of grantor) (Print or type) (Address of grantor) (Number and street)

(City, State, and Zip code) Extent of Authority (if licensing agreement):

Signature of grantor ( In ink): ___

FAA FORM 8110-2-1(10-69) PAGE 3 of 3

FAA APPROVED MODEL LIST (AML) NO. SE01243WI

FOR INTAKE TUBE DRAIN INSTALLTION

BARRON AVIATION, LLC

Original Issue Date: July 13, 2004

Item Type Certificate Holder (Engine Make) Engine Model (Series) Original Type Certificate Certification Basis for Alteration FAA Approved Document List Revision Level and Date AML Amendment Date 1 Teledyne Continental Motors (Continental) W670-6A W670-6N W670-16 W670-K W670-M W670-23 E-162 Aeronautics Bul. 7-A, or CAR 13 as defined on the TCDS Drawing and Document List BA-3817-DL, Rev. 0 Dated 2-26-04 N/A 2 Air Repair, Inc.

(Jacobs-Page) R-755A1 R-755A2 R-755A2M R-755A2M1 R-755B1 R-755B2 R-755B2M R-755E E-237 CAR 13 as defined on the TCDS Drawing and Document List BA-3817-DL, Rev. 0 Dated 2-26-04 N/A 3 Air Repair, Inc.

(Jacobs) L-4 L-4M L-4MA L-4MA7 L-4MB 121 As defined on the TCDS Drawing and Document List BA-3817-DL, Rev. 0 Dated 2-26-04 N/A 4 Air Repair, Inc.

(Jacobs) L-6 L-6M L-6MA L-6MB L-6MBA L-6MN 195 As defined on the TCDS Drawing and Document List BA-3817-DL, Rev. 0 Dated 2-26-04 N/A

FAA Approved: Date:

Wichita Aircraft Certification Office Program Manager