What it approves
Installation of a new Torque Transmitter with new cockpit torque indicator requirements
What the certificate says
From the PDF’s text layer, without the form’s printed wording. Layout and order may differ; the PDF is the record.
This Certificate issued to Diamond J, Inc.
2020 West Harry Wichita, KS 67213 Part 33* of the Civil Aviation Regulations. *Certification basis is set forth in Type Certificate Data Sheet E19EU Original Product Type Certificate Number :
E19EU Turbomeca Arriel
1D1 Description of Type Design Change : Installation of a new Torque Transm itter with new cockpit torque indicator requirements in accordance with FAA Approved Diam ond J, Inc. Drawing Number 87154, Rev.
IR, dated Novem ber 12, 2005, or later FAA approve d revisions. This STC is required prior to accomplishing STC SR01858LA.
Limitations and Conditions: Approval of this change in type design applies to the above engine model(s) only. This approval should not be extended to an engine m odel on which other previously approved modifications are incorporated unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of that engine. This STC is required prior to accom plishing STC SR01858LA. A copy of this STC must be included in the permanent records of the modified engine. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.
Date of application : September 19, 2005
Date of issuance : January 18, 2006
( Signature) Manager, Propulsion Branch, Los Angeles Aircraft Certification Office ( Title)
ADs that name this STC · 0
An AD can apply because an STC is installed, or mention one in its text.
Approved models · 1
| Make | Model | Data sheet |
|---|---|---|
| Turbomeca S.A. | Arriel 1D1 | E19EU |