STC SE01944LA

Supplemental type certificate · Jet Engineering LTD

Holder
Jet Engineering LTD · United States
Status
Current · Reissued
Status date
September 17, 2009
Applied
January 10, 2005
Product
Engine
Certification basis
Part 21
Data sheet
TCDSE9NE

From FAA DRS, with our copy of the certificate PDF. DRS record last changed December 6, 2025.

What it approves

Installation of a JET Engineering, Ltd. Turbine Exhaust Cone Mixer (TECM).

What the certificate saysOCR

This is OCR from the scanned FAA certificate. OCR can misread letters and numbers.

United States of America Department of Transportation Federal Aviation Administration Supplemental Type Certificate Number: SE01944LA This certificate issued to: JET ENGINEERING, LTD.

2285 East Elvira Road Tucson, Arizona 85745 Part 33* of the Federal Aviation Pegulalions. *certification basis is set forth in Type Certificate Date Sheet EONE Original Product Type Certificate Number: EINE Make: Pratt & Whitney Model: JT8D-217, -217A, -217C, -219 Description of Type Design Change: Installation of a JET Engineering, Ltd. Turbine Exhaust Cone Mixer (TECM) on the above engine model(s) in accordance with JET Engineering Master Drawing List (MDL) No. 205-1000, Rev. D, dated January 17, 2007, or later FAA approved revisions. The following document is applicable for this installation: JET-TR-805 'Supplemental Structural Inspection Requirements", Revision N/C, dated April 27, 2004, or later FAA approved revisions.

Limitations and Conditions: This installation must be done concurrently with STC No. ST01943LA installation of Jet Engineering, Ltd. Advanced Jet Nozzles which modifies the airplane engine installation.

Approval of this change in type design applies to the above engine model(s) only and must have United Technologies/P & W Service Bulletin No. 6091, "Exhaust Cone Attachment Modification" installed.

This approval should not be extended to other specific engines of the models on which other previously approved modifications are incorporated, unless it is determined that the interrelationship between this installation and any previously approved configuration will not introduce any adverse effect upon the airworthiness of that engine. If the holder agrees to permit another person to use this certificate to alter the product, the holder shall give the other person written evidence of that permission.

Date of Application: January 10, 2005 Date Reissued: February 8, 2008, September 17, 2009 Date of Issuance: January 17, 2007

FEDERAL AVIATION TOMINSTRATO Manager, Propulsion Branch Los Angeles Aircraft Certification Office (Title)

TRANSFER ENDORSEMENT Transfer the ownership of the Supplemental Type Certificate Number.

to (Name of transferee)_ (Address of transfer) (Number and street) (City, State, and Zip code) from (Name of grantor) (Print or type)_ (Address of grantor) (Number and street) (City, State, and Zip code) Extent of Authority (if licensing agreement):

Signature of grantor (In ink):

ADs that name this STC · 0

An AD can apply because an STC is installed, or mention one in its text.

No AD in this release names this STC

Approved models · 4

MakeModelData sheet
Pratt & Whitney DivisionJT8D-217E9NE
Pratt & Whitney DivisionJT8D-217AE9NE
Pratt & Whitney DivisionJT8D-217CE9NE
Pratt & Whitney DivisionJT8D-219E9NE

Every issue · 4

DRS keeps each issue of an STC as its own record, with its own certificate and attachments.

DateStatusFiles
September 17, 2009Reissued, currentCertificate
February 8, 2008Amended, earlier issueCertificate
February 13, 2007Amended, earlier issueCertificate
January 17, 2007Issued, earlier issueCertificate